|
Manufacturing capabilities
|
Width:
|
4 mm to 25 mm
|
|
Thickness:
|
0.20 mm to 1.00 mm
|
|
Grad:
|
High carbon / Medium carbon and alloy steel
|
|
Edges:
|
Sheared, round and square
|
|
Finish:
|
Bright, Blue, Bronze and Furnace grey
|
|
Flatness:
|
Maximum 0.025 mm in 25.4mm width
|
|
Camber:
|
Maximum deviation +/- 1.00 mm per 1000 mm length Coil weight: Maximum 4.000 kgs / mm strip width
|
|
Packing:
|
The strips are normally packed with a light coat of anti rust oil followed by wrapping it with a thick polythene film and finally with polythene lined Hessain strip.
|
|
Tolerances
|
|
Our Tolerance Range for Thickness
|
|
preferred Nominal (Thickness in mm)
|
Permissible thickness variation in the case of nominal width (in mm)
|
|
|
<125
|
|
0.20 to 0.60
|
0.020
|
|
0.60 to 0.90
|
0.025
|
|
1.00 to 1.20
|
0.030
|
|
1.50 to 2.00
|
0.035
|
|
2.50 to 3.50
|
0.045
|
Our Tolerance Range for width
|
in the case of nominal thickness (in mm)
|
Permissible variation on nominal width (in mm) Plus & Minus
|
|
|
<125
|
|
0.20 to 0.50
|
0.100
|
|
0.50 to 1,00
|
0.200
|
Industrial Use
- Flat spring for auto mobile clutch plates
|
- Shims and washers for automobile industries
|
- Band saw blades for wood cutting
|
- Hand saw blades for wood working
|
- Cross cut saw and pit saw for wood cutting
|
|
|
|
|
|
|
|
|
|
|
|
|
- Wall putty used for plastering/ colouring etc
|
|
