After successful long experience in manufacturing of Dropwire, we have developed wide range of Riderless Heald Wire in all types of loops, strip width, strip thickness variety of eyelets to suit every count of yarn  and density of weaving to achieve maximum life of Heald Wire with ease  of smooth pass of thread from eyelet.

 In length almost all sizes suitable for 'C' shape, 'J' shape and 'O' shaped end loops Heald frame in length of 280mm, 331mm, 356mm, 382mm.

In strip thickness we can offer 0.3mm thickness for standard application and 0.4mm thickness for heavy fabrics and specially developed from 0.2mm to 0.6mm thickness.

 

The fine polished eyelet and side edge of Heald Wire increase result of fabric lusture and overall finish after process of fabric and design.

 

 In eyelet size we can offer almost all combination eyelets for most suitability of every size yarn and fabric density. Eyelets available are:5.5 x 1.2mm.

 

6.5 x 1.8mm
6.5 x 2.5mm
7.8 x 3.8mm
8 x 3.8mm
8 x 2.5mm

 

Eyelet placed option available are in center 5mm above center, 10mm above center. In drawing angle to suit every individual practice we can offer 15 to 35 to get maximum benefit to reduce time of drawing in increase friction life of Heald and minimize risk of inter friction of yarn and Heald.

In plating we can offer range of almost all plating like Zinc Blue Chromate, Zinc Golden Chromate, Nickel Bright, Nickel Satin, Duplex Nickel, Cadmium tough smooth and Copper Plating. We maintain all plating with scientific care and real true Chemistry to enhance long rust protection life. Non-ferrous metal used are pure virgin having 99.9995% purity and from world leader brand like A-Z Australia, Inco Canada and Birla-Copper.

 

Table for Selection of Suitable heald

Suitable for warp counts					Maximum density				Flat steel healds with laterally open, J-or-C-shaped end loops
Tex system	Metric number	Denier	English count		Strip Angle		Eye Angle		Strip SizeCross section	Eyelet Size
			Cotton	Worsted	Simplex	Duplex	Simplex	Duplex
Tt	Nm	Td	NeB	NeK	Per Cm	Per Cm	Per Cm	Per Cm	MM	MM
30	34	300	20	30	12	18	15	23	5.5x0.30	5.5x1.2 - ]
72	14	650	8	12	8	12	10	15	5.5x0.30	6.5x1.8 - ]
					7	-	9	-	5.5x0.40
					-	12	-	15
250	4	-	2	-	6	-	8	-	5.5x0.30	6.5x2.5 - ]
					6	-	8	-	5.5x0.40
250	4	-	2	4	4	-	7	-	5.5x0.30	8.0x2.5 - ]
					4	-	6	-	5.5x0.40
					10	-	-	-	5.5x0.30	7.8x3.8 - ]
					8	-	-	-	5.5x0.40
30	34	300	20	30	12	18	15	23	5.5x0.30	5.5x1.2 - c
					-	15	-	17
72	14	650	8	12	8	12	10	15	5.5x0.30	6.5x1.8 - c
					7	-	9	-	5.5x0.38
250	4	-	2	-	6	-	8	-	5.5x0.30	6.5x2.5 - c
					6	-	8	-	5.5x0.38
250	4	-	2	4	4	-	7	-	5.5x0.30	8.0x2.5 - c
					4	-	6	-	5.5x0.38
					10	-	-	-	5.5x0.30	7.8x3.8 - c
					8	-	-	-	5.5x0.38

 Guidelines for densities have been developed through our extensive application experience.  However, they  can  be  influenced by warp  yarn types, required densities, or pattern parameters.

Heald wire densities depends on the warp yarn used.

Above are the standard size. We are specia;ist in supply of thin or thick heald to get optimum result. You are requested to contact for technical details.

	6.5 x 1.8mm 6.5 x 2.5mm 7.8 x 3.8mm 8 x 3.8mm 8 x 2.5mm
	h: F-4

In eyelet size we can offer almost all combination eyelets for most suitability of every size yarn and fabric density. Eyelets available are:5.5 x 1.2mm
	6.5 x 1.8mm 6.5 x 2.5mm 7.8 x 3.8mm 8 x 3.8mm 8 x 2.5mm
	Kot-Tech: F-4